Screed / Primer / Adhesive/ D.P.M

Karndean Acrylic Adhesive is ideal for use in all normal domestic and contract installations, excluding areas subject to excessive temperature and moisture. We recommend using A1 or A2 Adhesive Trowels for this adhesive. Karndean Acrylic Adhesive covers : 2.5 Litre approx 10m2 5 Litre approx 20m2 15 Litre approx 55m2

Amtico HT Adhesive is suitable for everywhere in the home or work place and in particular, useful for areas where room temperature is likely to vary, such as conservatories or areas with underfloor heating. Amtico High Temperature Adhesive covers : 5 Litre approx 15m2 15 Litre approx 45m2

Amtico Solvent Free Adhesive is for use where there is not excessive moisture or temperature change. PLEASE NOTE: NOT suitable for conservatories or areas with underfloor heating. Amtico Solvent Free Adhesive covers : 5 Litre approx 15m2 15 Litre approx 45m2

Ardex P51 Primer & Bonding Agent is designed for porous or absorbent sub floors, which greatly improves the adhesion of the ARDEX sub-floor smoothing and levelling compounds, also helps prevent air bubbles/pin holes and prolongs the flow life. For more information and specs please visit www.ardex.co.uk

Ardex Arditex NA Powder & Bottle is a self-smoothing, protein free latex levelling compound with improved flow and excellent properties of adhesion, flexibility and very water resistance. Due to its unique formulation Arditex NA can be used above and below a damp proof membrane such as Ardex DPM. Arditex NA is exceptionally easy to mix and produces a very low drag on the trowel during application making this solution easy to level. Arditex NA also allows you to apply floorcoverings after just 4 hours and can be used over old adhesive residues. Coverage: Approximately 1.6kg of mortar/m²/mm, e.g. one unit will cover approximately 5m² at 3mm thickness For more information and specs please look on www.ardex.co.uk

Bostik 300 is a high strength, polymer modified, cementitious underlayment. It is recommended for the smoothing and levelling of most common subfloors. CompositionSynthetic resin modified cement powder Consumption / CoverageApprox. 5 m² at 3 mm thickness Working Time / Flow LifeApprox. 15 minutes at 20ºC Set For WalkingAfter approx. 2 hrs at 20ºC, 3mm thick Dry For Floor CoveringAfter approx. 6hrs (textile), 12hrs (vinyl) at 20ºC, 3mm thick

Creom is a quick acting, non-toxic, environmentally friendly moisture suppressant that enables recently laid and refurbished concrete floors to be speedily brought into use. Creom suppresses the upward passage of residual moisture in the concrete slab enabling the installation of the chosen flooring system to be carried out at RH levels that would normally be too high to allow such installation to proceed. Creom is suitable for application onto the following prepared surfaces: Power floated concrete floors, Sand and concrete screeds, Approved latex screeds . Creom Moisture Suppressanthas become firmly established as the product of choice for many flooring contractors in the UK.No mixing , No waste, Cost-effective, Non toxic, Easy to use.... isn't it time you joined them? Creom 5 litre container will cover approximately 25m2 atTwo coats.

Ardex Dpm 1 C is a one coat surface Damp Proof Membrane - Residual Moisture Suppressant Size (pack): Available in 6kg and 10kg two component tin.Coverage: Approx 1.8m2 per kg, i.e. one 10kg unit will cover approximately 18m2 in one coat. Suppresses residual constructional moisture in powerfloated concrete slabs Provides a surface damp proof membrane Guarantees the early laying of all floorcoverings Can accommodate Hygrometer readings up to 98% RH Easy to apply Fast curing one coat system Can be used in conjunction with ARDEX Industrial Systems For more information and specs please visit www.ardex.co.uk