F. Ball & Co

STOPGAP 700 is an ultra-fast drying, fibre reinforced self-levelling smoothingunderlayment designed for use on plywood and steel subfloors prior to theinstallation of new floorcoverings.

F. Ball & Co Neoprene emulsion primer promotes adhesion of Stopgap smoothing underlayments to both absorbent and non-absorbent surfaces. Designed to prevent rapid drying of adhesives and smoothing underlayments.

F. Ball & Co Styccobond F3 is anaqueous dispersion adhesive which offers excellent wet grab and benefits from an early build up of strength. It is protected against biodegradation and is suitable for use over normal underfloor heating installations. When used in conjunction with Styccobond F2 it provides a release bond for the easy removal of specified floorcoverings. Long established with over 40 years on the market, it is now well recognised as the UK's most used flooring adhesive Carpet - Secondary, Foam, Felt, Fibre Bonded, Latex, Unitary and Woven Carpet Tile - Bitumen/Felt Underlay - Rubber Crumb Vinyl/PVC Tile -Vinyl/PVC (to BS3260 / EN654) Cork - Cork (up to 3.2mm thick)

F. Ball & Co Styccobond F41 Tackifier is a solvent free emulsion adhesive designed to provide a permanently tacky film to prevent loose lay carpet tiles from moving. F41 allows the tile to be lifted and replaced easily without remedial work. Non-flammable and resistant to plasticiser migration. The tackifier has an added rust inhibitor element, which prevents the product from causing oxidation when used on raised access flooring or other metallic subfloors. The tackifier is protected against biodegradation and is suitable for use over underfloor heating installations.

F. Ball & Co Styccobond F44 is a solvent free acrylic emulsion adhesive which is designed to give a high bond strength, strong initial tack and a long open time. It is protected against biodegradation and is suitable for use over normal underfloor heating installations. When used in conjunction with Styccobond F2 it provides a release bond for the easy removal of specified floorcoverings. To minimise the effect of adhesive shadowing through the vinyl floorcovering, the adhesive can be trowel applied and flattened with a paint roller. The 'double drop' technique can also be used to reduce the drying time. Vinyl/PVC Sheet and Tile - Felt, Mineral Felt, PVC Foam and PVC Carpet Sheet and Tile - Some PVC Backed Carpets

F. Ball & Co Styccobond Pressure Sensitive Adhesive is a solvent free adhesive that dries to a permanent tack. To minimise the effect of adhesive shadowing through thin vinyl/PVC floorcoverings, the adhesive can be trowel applied and flattened with a paint roller. Indefinite open time. Vinyl/PVC Sheet and Tile - PVC Foam and PVC

Styccobond F48 is a solvent free co-polymer emulsion adhesive having particularly high resistance to both heat and PVC plasticisers making it particularly suitable for use in conservatories and areas where floor to ceiling windows are installed.

F. Ball & Co Styccobond High Grab Linoleum Adhesive is a non-flammable, synthetic rubber emulsion which is a safer alternative to traditional gum spirits. It has a greater level of initial grab and moisture resistance than lignin paste. Protected against biodegradation and suitable for use over underfloor heating installations.